Plumbing Pump-Valve Installation Safe Work Method Statement
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian & New Zealand legislation.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Plumbing Pump-Valve Installation Safe Work Method Statement
This Plumbing Pump-Valve Installation Safe Work Method Statement (SWMS) covers hazards and controls associated with the removal and installation of industrial pumps and valves.
This SWMS is also suitable for the installation of fire servicebooster assemblies and hydrants.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Mobile plant movement
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Work in an area that may have a contaminated or flammable atmosphere
Additional controls are included for Electrical Equipment, Elevated Levels, Slips, Trips & Falls, Hazardous Substances, Hot Work, Hazardous Manual Tasks, Outdoor Work, Silica Dust & Environmental Considerations.
Job Steps Covered in Plumbing Pump-Valve Installation SWMS:
(includes potential hazards and control measures)
- Provide Training on the Health Effects associated with Respirable Crystalline Silica Dust
- Planning
- Working Outdoors
- Arrival On-site & Assess On-site Conditions
- Work Area Set-up
- Environment
- Housekeeping
- Manual Tasks
- Materials Delivery
- Working with Powered & Non-powered Tools
- Hazardous Substance/Chemical Use
- Working at Height on Ladders
- Welding, Soldering & Cutting
- Disconnect Existing Pump/Motor/Valve
- Lifting Pumps (motors-valves into/out of position)
- Gasket Removal/Flange Cleaning
- Fit New Pump/Motor/Valve
- Testing New System
- On Completion
- Emergency Response
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian & New Zealand legislation.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Plumbing Pump-Valve Installation Safe Work Method Statement
This Plumbing Pump-Valve Installation Safe Work Method Statement (SWMS) covers hazards and controls associated with the removal and installation of industrial pumps and valves.
This SWMS is also suitable for the installation of fire servicebooster assemblies and hydrants.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Mobile plant movement
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Work in an area that may have a contaminated or flammable atmosphere
Additional controls are included for Electrical Equipment, Elevated Levels, Slips, Trips & Falls, Hazardous Substances, Hot Work, Hazardous Manual Tasks, Outdoor Work, Silica Dust & Environmental Considerations.
Job Steps Covered in Plumbing Pump-Valve Installation SWMS:
(includes potential hazards and control measures)
- Provide Training on the Health Effects associated with Respirable Crystalline Silica Dust
- Planning
- Working Outdoors
- Arrival On-site & Assess On-site Conditions
- Work Area Set-up
- Environment
- Housekeeping
- Manual Tasks
- Materials Delivery
- Working with Powered & Non-powered Tools
- Hazardous Substance/Chemical Use
- Working at Height on Ladders
- Welding, Soldering & Cutting
- Disconnect Existing Pump/Motor/Valve
- Lifting Pumps (motors-valves into/out of position)
- Gasket Removal/Flange Cleaning
- Fit New Pump/Motor/Valve
- Testing New System
- On Completion
- Emergency Response