National Safe Work Month - Equip your team with essential workplace safety solutions this Safe Work Month with 25% off selected essential WHS documentation. Shop now. *T&C's apply. Discount is applied at cart.

Water Tanks, Blue Sky

Pumpset-Sprinklers-Tanks Inspection Testing Safe Work Method Statement

  • Instant Document Delivery via Email.
  • Add to your existing management system.
  • Can assist in ensuring workers are adequately trained.
  • Customisation instructions provided.
  • Microsoft Word Format (Fully editable).
  • Only pay once (no subscriptions required).

Pumpset-Sprinklers-Tanks Inspection Testing Safe Work Method Statement (SWMS)

This Pumpset-Sprinklers-Tanks Inspection Testing Safe Work Method Statement (SWMS) covers general hazards and controls associated with the inspection and testing of pumpsets, sprinklers & tanks.

Job Steps Covered in Pumpset-Sprinklers-Tanks Inspection Testing SWMS

  1. Planning: Outlines the initial steps including system checks and coordination with the principal contractor.
  2. Client Consultation & Code of Conduct: Focuses on hazard consultation and maintaining client property integrity.
  3. Check Weather Conditions & Prepare: Advises on adjusting work schedules according to weather conditions.
  4. Arrival On-site & Assess On-site Conditions: Details the assessment of site conditions and necessary precautions.
  5. Work Area Set-up: Describes setting up an exclusion zone and public safety.
  6. Testing: Covers the standards and schedules for testing and inspection.
  7. Pressure Testing: Outlines safety measures for handling equipment under pressure.
  8. Confined Space: Addresses the need for a dedicated Confined Spaces SWMS if applicable.
  9. Working in Noisy Environments: Advises on noise management and hearing protection.
  10. Working Around Pinch Points: Highlights precautions for working near machinery.
  11. Working in Dust/Fumes: Details protective measures against hazardous materials.
  12. Housekeeping: Emphasises maintaining a clean and safe work environment.
  13. Manual Tasks: Advises on avoiding musculoskeletal injuries.
  14. Electrical Hazards: Outlines precautions for working near electrical utilities.
  15. Working with Powered & Non-powered Tools: Details safe tool use.
  16. Working at Height on Ladders & Near Openings: Specifies fall protection measures.
  17. Refuelling Equipment: Covers safety measures for handling fuel.
  18. Environment: Advises on minimising environmental impact.
  19. On Completion: Details steps to secure the site post-work.
  20. Emergency Response: Outlines a response for handling emergencies.

Each purchase of our SWMS comes with a complimentary copy of the Legislation & Codes of Practice Reference List, valued at $19.95. This valuable resource provides an up-to-date overview of relevant laws and standards, further supporting your compliance efforts.

Key Features of the SWMS

  • Comprehensive Hazard Management: Identifies and provides control measures for a wide range of potential hazards.
  • Regulatory Compliance: Aligns with Australian legislation for workplace safety.
  • Detailed Control Measures: Offers specific actions to mitigate risks associated with high-risk construction work.

Who is it Suitable For?

This SWMS is essential for businesses and contractors involved in the inspection and testing of pumpsets, sprinklers, and tanks, particularly those engaged in construction projects where these systems are critical. It's suitable for safety officers, site supervisors, and workers directly involved in these activities.

Ensure your team is equipped with the knowledge and tools to maintain a safe work environment when working with pumpsets, sprinklers, and tanks.

  • Instant Document Delivery via Email.
  • Add to your existing management system.
  • Can assist in ensuring workers are adequately trained.
  • Customisation instructions provided.
  • Microsoft Word Format (Fully editable).
  • Only pay once (no subscriptions required).

Pumpset-Sprinklers-Tanks Inspection Testing Safe Work Method Statement (SWMS)

This Pumpset-Sprinklers-Tanks Inspection Testing Safe Work Method Statement (SWMS) covers general hazards and controls associated with the inspection and testing of pumpsets, sprinklers & tanks.

Job Steps Covered in Pumpset-Sprinklers-Tanks Inspection Testing SWMS

  1. Planning: Outlines the initial steps including system checks and coordination with the principal contractor.
  2. Client Consultation & Code of Conduct: Focuses on hazard consultation and maintaining client property integrity.
  3. Check Weather Conditions & Prepare: Advises on adjusting work schedules according to weather conditions.
  4. Arrival On-site & Assess On-site Conditions: Details the assessment of site conditions and necessary precautions.
  5. Work Area Set-up: Describes setting up an exclusion zone and public safety.
  6. Testing: Covers the standards and schedules for testing and inspection.
  7. Pressure Testing: Outlines safety measures for handling equipment under pressure.
  8. Confined Space: Addresses the need for a dedicated Confined Spaces SWMS if applicable.
  9. Working in Noisy Environments: Advises on noise management and hearing protection.
  10. Working Around Pinch Points: Highlights precautions for working near machinery.
  11. Working in Dust/Fumes: Details protective measures against hazardous materials.
  12. Housekeeping: Emphasises maintaining a clean and safe work environment.
  13. Manual Tasks: Advises on avoiding musculoskeletal injuries.
  14. Electrical Hazards: Outlines precautions for working near electrical utilities.
  15. Working with Powered & Non-powered Tools: Details safe tool use.
  16. Working at Height on Ladders & Near Openings: Specifies fall protection measures.
  17. Refuelling Equipment: Covers safety measures for handling fuel.
  18. Environment: Advises on minimising environmental impact.
  19. On Completion: Details steps to secure the site post-work.
  20. Emergency Response: Outlines a response for handling emergencies.

Each purchase of our SWMS comes with a complimentary copy of the Legislation & Codes of Practice Reference List, valued at $19.95. This valuable resource provides an up-to-date overview of relevant laws and standards, further supporting your compliance efforts.

Key Features of the SWMS

  • Comprehensive Hazard Management: Identifies and provides control measures for a wide range of potential hazards.
  • Regulatory Compliance: Aligns with Australian legislation for workplace safety.
  • Detailed Control Measures: Offers specific actions to mitigate risks associated with high-risk construction work.

Who is it Suitable For?

This SWMS is essential for businesses and contractors involved in the inspection and testing of pumpsets, sprinklers, and tanks, particularly those engaged in construction projects where these systems are critical. It's suitable for safety officers, site supervisors, and workers directly involved in these activities.

Ensure your team is equipped with the knowledge and tools to maintain a safe work environment when working with pumpsets, sprinklers, and tanks.

PDF Download
PDF File

Frequently Asked Questions

Safe Work Method Statement (SWMS) FAQ's. View
OHS/WHS Management Systems FAQ's. View
Quality Management System (QMS) FAQ's. View
New Zealand FAQ's. View
Custom Branding FAQ's. View