Cladding Removal - Installation EWP Access Safe Work Method Statement
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian & New Zealand legislation.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Cladding Removal-Installation EWP Access Safe Work Method Statement
This Cladding Removal-Installation EWP access Safe Work Method Statement (SWMS) covers hazards and controls associated with the use of an EWP to remove and install insulation, sarking & cladding.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Involves a risk of a person falling from 2m or more, including work on telecommunications towers
Job Steps Covered in Cladding Removal-Installation EWP Access SWMS:
(includes potential hazards and control measures)
- Planning
- Implement a Falls Emergency Rescue Plan
- Arrival On-site & Assess On-site Conditions
- Delivery, set-up & removal of EWP
- Work Area Set-up
- Materials & Waste Delivery & Removal
- Environment
- Housekeeping
- Manual Tasks
- Pre-inspect the EWP & Harness
- Removing & Replacing Cladding
- Fuelling on-site
- On Completion
- Emergency Response
We've recently reviewed and updated this SWMS in line with the new Code of Practice for managing risks of plant in the workplace. Shop confidently, knowing you're getting the latest, most accurate information for your workplace safety needs.
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian & New Zealand legislation.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Cladding Removal-Installation EWP Access Safe Work Method Statement
This Cladding Removal-Installation EWP access Safe Work Method Statement (SWMS) covers hazards and controls associated with the use of an EWP to remove and install insulation, sarking & cladding.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Involves a risk of a person falling from 2m or more, including work on telecommunications towers
Job Steps Covered in Cladding Removal-Installation EWP Access SWMS:
(includes potential hazards and control measures)
- Planning
- Implement a Falls Emergency Rescue Plan
- Arrival On-site & Assess On-site Conditions
- Delivery, set-up & removal of EWP
- Work Area Set-up
- Materials & Waste Delivery & Removal
- Environment
- Housekeeping
- Manual Tasks
- Pre-inspect the EWP & Harness
- Removing & Replacing Cladding
- Fuelling on-site
- On Completion
- Emergency Response
We've recently reviewed and updated this SWMS in line with the new Code of Practice for managing risks of plant in the workplace. Shop confidently, knowing you're getting the latest, most accurate information for your workplace safety needs.