Roof Edge Protection Safe Work Method Statement
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian and New Zealand legislation.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Roof Edge Protection Safe Work Method Statement
This Roof Edge Protection Safe Work Method Statement (SWMS) covers hazards and controls when using extension ladders, mobile scaffolding and safety harness to perform the installation and dismantling of roof edge protection.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Asbestos disturbance
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Involves a risk of a person falling from 2m or more, including work on telecommunications towers
Additional controls are included for Electrical Equipment, Slips, Trips and Falls, Hazardous Substances, Hazardous Manual Tasks, Outdoor Work and Environmental Considerations.
Job Steps Covered in Roof Edge Protection SWMS:
(includes potential hazards and control measures)
- Planning
- Implementing a Falls Emergency Rescue Plan
- Arrival On-site and Assess On-site Conditions
- Work Area Set-up
- Working Outdoors
- Environment
- Housekeeping
- Manual tasks
- Pre-inspect Edge Protection System Components
- Accessing the Roof using Mobile Scaffolding or Extension Ladder
- Fixing Edge Protection
- Working with Powered and Non-powered Tools
- Handover
- Dismantling
- On Completion
- Emergency Response
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian and New Zealand legislation.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Roof Edge Protection Safe Work Method Statement
This Roof Edge Protection Safe Work Method Statement (SWMS) covers hazards and controls when using extension ladders, mobile scaffolding and safety harness to perform the installation and dismantling of roof edge protection.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Asbestos disturbance
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Involves a risk of a person falling from 2m or more, including work on telecommunications towers
Additional controls are included for Electrical Equipment, Slips, Trips and Falls, Hazardous Substances, Hazardous Manual Tasks, Outdoor Work and Environmental Considerations.
Job Steps Covered in Roof Edge Protection SWMS:
(includes potential hazards and control measures)
- Planning
- Implementing a Falls Emergency Rescue Plan
- Arrival On-site and Assess On-site Conditions
- Work Area Set-up
- Working Outdoors
- Environment
- Housekeeping
- Manual tasks
- Pre-inspect Edge Protection System Components
- Accessing the Roof using Mobile Scaffolding or Extension Ladder
- Fixing Edge Protection
- Working with Powered and Non-powered Tools
- Handover
- Dismantling
- On Completion
- Emergency Response
