Water Jetting Drains Safe Work Method Statement
- Instant Document Delivery via Email.
- Add to your existing management system.
- Can assist in ensuring workers are adequately trained.
- Customisation instructions provided.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Water Jetting Drains Safe Work Method Statement (SWMS)
The Water Jetting Drains Safe Work Method Statement (SWMS) addresses the specific hazards and control measures associated with operating a truck-mounted hydro-jet for clearing blocked sewers and drains.
Job Steps Covered in Water Jetting Drains SWMS
- Check Weather Conditions & Prepare: Addresses safety measures for outdoor work, including weather considerations.
- Travel To/From/Between Sites: Outlines conducting pre-start inspections and following safe travel protocols.
- Obtaining Water from a Hydrant or another Water Source: Managing public safety while filling from hydrants or other sources.
- Arrival On-site & Assess On-site Conditions: Involves evaluating site conditions for safety before commencing work.
- Work Area Set-up: Focuses on establishing secure work zones to prevent unauthorised access.
- Environment: Covers environmental impact considerations, including noise and waste management.
- Housekeeping: Outlines maintaining a clean work area to prevent slips, trips, and falls.
- Manual Tasks: Guides of ergonomic practices to avoid musculoskeletal injuries.
- Hazardous Substance/Chemical Use: Provides guidelines for safely handling chemicals and hazardous substances.
- Lifting Pit/Maintenance Hole Lid: Outlines safe lifting techniques to prevent crush injuries.
- Inspect the Drain: Covers safety measures for inspecting the drain.
- Pump Use: Includes guidelines to prevent burns and equipment failure.
- Hydro Jetting: Control measures for maintaining control of high-pressure equipment to avoid injuries.
- Fuelling On-site: Safe refuelling practices to prevent fires and spills.
- On Completion: Steps for workers to sign out and secure the site.
- Emergency Response: Outlines an emergency response for injuries or environmental incidents.
Each purchase of our SWMS comes with a complimentary copy of the Legislation & Codes of Practice Reference List, valued at $19.95. This valuable resource provides an up-to-date overview of relevant laws and standards, further supporting your compliance efforts.
Key Features of the SWMS
- Regulatory Compliance: This SWMS aligns with Australian legislation, so your operations meet legal requirements.
- Hazard Management: Comprehensive control measures are outlined for various high-risk activities, promoting a safer work environment.
- Instant Document Delivery: Receive your SWMS via email immediately after purchase, allowing for quick implementation.
- Editable Format: The document is in Microsoft Word format, enabling full customisation to fit your operational requirements.
Who is it Suitable For?
This SWMS is ideal for businesses and contractors involved in drainage maintenance, plumbing, and construction, including:
- Construction Managers
- Site Supervisors
- Safety Officers
- Plumbers
- Maintenance Workers
Ensure your team is equipped with the right tools for safety and compliance. Purchase the Water Jetting Drains SWMS today and take a proactive step toward a safer workplace.
- Instant Document Delivery via Email.
- Add to your existing management system.
- Can assist in ensuring workers are adequately trained.
- Customisation instructions provided.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Water Jetting Drains Safe Work Method Statement (SWMS)
The Water Jetting Drains Safe Work Method Statement (SWMS) addresses the specific hazards and control measures associated with operating a truck-mounted hydro-jet for clearing blocked sewers and drains.
Job Steps Covered in Water Jetting Drains SWMS
- Check Weather Conditions & Prepare: Addresses safety measures for outdoor work, including weather considerations.
- Travel To/From/Between Sites: Outlines conducting pre-start inspections and following safe travel protocols.
- Obtaining Water from a Hydrant or another Water Source: Managing public safety while filling from hydrants or other sources.
- Arrival On-site & Assess On-site Conditions: Involves evaluating site conditions for safety before commencing work.
- Work Area Set-up: Focuses on establishing secure work zones to prevent unauthorised access.
- Environment: Covers environmental impact considerations, including noise and waste management.
- Housekeeping: Outlines maintaining a clean work area to prevent slips, trips, and falls.
- Manual Tasks: Guides of ergonomic practices to avoid musculoskeletal injuries.
- Hazardous Substance/Chemical Use: Provides guidelines for safely handling chemicals and hazardous substances.
- Lifting Pit/Maintenance Hole Lid: Outlines safe lifting techniques to prevent crush injuries.
- Inspect the Drain: Covers safety measures for inspecting the drain.
- Pump Use: Includes guidelines to prevent burns and equipment failure.
- Hydro Jetting: Control measures for maintaining control of high-pressure equipment to avoid injuries.
- Fuelling On-site: Safe refuelling practices to prevent fires and spills.
- On Completion: Steps for workers to sign out and secure the site.
- Emergency Response: Outlines an emergency response for injuries or environmental incidents.
Each purchase of our SWMS comes with a complimentary copy of the Legislation & Codes of Practice Reference List, valued at $19.95. This valuable resource provides an up-to-date overview of relevant laws and standards, further supporting your compliance efforts.
Key Features of the SWMS
- Regulatory Compliance: This SWMS aligns with Australian legislation, so your operations meet legal requirements.
- Hazard Management: Comprehensive control measures are outlined for various high-risk activities, promoting a safer work environment.
- Instant Document Delivery: Receive your SWMS via email immediately after purchase, allowing for quick implementation.
- Editable Format: The document is in Microsoft Word format, enabling full customisation to fit your operational requirements.
Who is it Suitable For?
This SWMS is ideal for businesses and contractors involved in drainage maintenance, plumbing, and construction, including:
- Construction Managers
- Site Supervisors
- Safety Officers
- Plumbers
- Maintenance Workers
Ensure your team is equipped with the right tools for safety and compliance. Purchase the Water Jetting Drains SWMS today and take a proactive step toward a safer workplace.
