Rough-in Final Fit-out Plumbing Safe Work Method Statement
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian & New Zealand legislation.
- Edit documents on the go with Microsoft Office Mobile App
- Only pay once (no subscriptions required).
Rough-in Final Fit-out Plumbing Safe Work Method Statement
This Plumbing (Rough-in/Final Fit-out) Safe Work Method Statement (SWMS) covers hazards and controls in regards to the safe installation and fitting of pipework, appliances, fixtures for hot/cold water and fire system installation.
This includes commercial, industrial and domestic plumbing works from the building line to termination points.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Mobile plant movement
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Involves a risk of a person falling from 2m or more, including work on telecommunications towers
- Work in an area that may have a contaminated or flammable atmosphere
Additional controls are included for Electrical Equipment, Elevated Levels, Slips, Trips & Falls, Hazardous Substances, Hot Work, Hazardous Manual Tasks, Outdoor Work, Silica Dust & Environmental Considerations.
Plumbing Risk Assessment
Looking to complete a plumbing project without risking your safety?
SafetyDocs provides a comprehensive risk assessment matrix with our SWMS to help you evaluate each step of the job.
With our easy-to-use guide, you can identify potential hazards and take steps to mitigate them.
FREE Legislation & Codes of Practice Reference List
Job Steps Covered in Rough-in Final Fit-out Plumbing SWMS:
(includes potential hazards and control measures)
- Provide Training on the Health Effects associated with Respirable Crystalline Silica Dust
- Identify Confined Space Work
- Arrival On-site & Assess On-site Conditions
- Working Outdoors
- Work Area Set-up
- Environment
- Housekeeping
- Manual Tasks
- Working with Powered & Non-powered Tools
- Hazardous Substance/Chemical Use
- Excavating, Backfilling
- Joining to Existing Water Pipes
- Installing Pipework
- Gas Welding, Soldering & Cutting
- Fitting Appliances & Fixtures
- Commission System
- On Completion
- Emergency Response
- Instant Document Delivery via Email.
- Add your logo easily.
- Add or delete information to any SWMS template.
- Customisation instructions provided.
- Complies with Australian & New Zealand legislation.
- Edit documents on the go with Microsoft Office Mobile App
- Only pay once (no subscriptions required).
Rough-in Final Fit-out Plumbing Safe Work Method Statement
This Plumbing (Rough-in/Final Fit-out) Safe Work Method Statement (SWMS) covers hazards and controls in regards to the safe installation and fitting of pipework, appliances, fixtures for hot/cold water and fire system installation.
This includes commercial, industrial and domestic plumbing works from the building line to termination points.
This SWMS covers High-Risk Construction Work (HRCW) controls related to:
- Mobile plant movement
- Pressurised gas distribution mains or piping chemical, fuel or refrigerant lines energised electrical installations or services
- Involves a risk of a person falling from 2m or more, including work on telecommunications towers
- Work in an area that may have a contaminated or flammable atmosphere
Additional controls are included for Electrical Equipment, Elevated Levels, Slips, Trips & Falls, Hazardous Substances, Hot Work, Hazardous Manual Tasks, Outdoor Work, Silica Dust & Environmental Considerations.
Plumbing Risk Assessment
Looking to complete a plumbing project without risking your safety?
SafetyDocs provides a comprehensive risk assessment matrix with our SWMS to help you evaluate each step of the job.
With our easy-to-use guide, you can identify potential hazards and take steps to mitigate them.
FREE Legislation & Codes of Practice Reference List
Job Steps Covered in Rough-in Final Fit-out Plumbing SWMS:
(includes potential hazards and control measures)
- Provide Training on the Health Effects associated with Respirable Crystalline Silica Dust
- Identify Confined Space Work
- Arrival On-site & Assess On-site Conditions
- Working Outdoors
- Work Area Set-up
- Environment
- Housekeeping
- Manual Tasks
- Working with Powered & Non-powered Tools
- Hazardous Substance/Chemical Use
- Excavating, Backfilling
- Joining to Existing Water Pipes
- Installing Pipework
- Gas Welding, Soldering & Cutting
- Fitting Appliances & Fixtures
- Commission System
- On Completion
- Emergency Response
