Tilt Tray Safe Work Method Statement
- Instant Document Delivery via Email.
- Add to your existing management system.
- Can assist in ensuring workers are adequately trained.
- Customisation instructions provided.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Tilt Tray Safe Work Method Statement (SWMS)
This Tilt Tray Safe Work Method Statement (SWMS) covers hazards and controls associated with the movement of plant and structures such as portable buildings or shipping containers (referred to as the load) using a Tilt Tray Transport vehicle.
Job Steps Covered in Tilt Tray Safe Work Method Statement
- Planning: Establishes route planning and briefing to avoid unpermitted travel and safety.
- Working Alone: Implements check-in procedures and Emergency Response for working alone.
- Vehicle Operation & Transporting the Load: Details pre-start inspections, safe operation, and collision avoidance measures.
- Arriving at Site: Covers site assessment, induction, and hazard identification upon arrival.
- Pick-up/Set-down of Load: Focuses on noise management and safe loading/unloading practices.
- Environment: Addresses environmental protection measures, including waste management and pollutant reduction.
- Housekeeping: Emphasises maintaining a clean and safe work area to prevent slips, trips, and falls.
- Manual Tasks: Outlines strategies to mitigate fatigue and musculoskeletal disorder (MSD) injuries.
- Refuelling: Establishes safe refuelling practices to prevent fire or explosion.
- On Completion: Details the final checks to secure the site and equipment.
- Emergency Response: Prepares workers for an efficient response to injuries, fatalities, or environmental damage.
Each purchase of our SWMS comes with a complimentary copy of the Legislation & Codes of Practice Reference List, valued at $19.95. This valuable resource provides an up-to-date overview of relevant laws and standards, further supporting your compliance efforts.
Key Features of the SWMS
- Comprehensive Hazard Management: Identifies and provides control measures for a wide range of potential hazards.
- Regulatory Compliance: Aligns with Australian legislation for workplace safety.
- Emergency Response: Includes an emergency response to enhance onsite safety.
- Environmental Consideration: Incorporates measures to minimise environmental impact during operations.
Who is it Suitable For?
This document is essential for businesses and contractors involved in using tilt tray transport vehicles, especially those engaged in construction, logistics, and any operations requiring the movement of heavy plant and structures. It's also invaluable for safety officers and site managers looking to enforce compliance and enhance workplace safety.
Ensure your team operates safely and in compliance with the latest industry standards. Get your copy of the Tilt Tray Safe Work Method Statement today and take a proactive step toward a safer workplace.
- Instant Document Delivery via Email.
- Add to your existing management system.
- Can assist in ensuring workers are adequately trained.
- Customisation instructions provided.
- Microsoft Word Format (Fully editable).
- Only pay once (no subscriptions required).
Tilt Tray Safe Work Method Statement (SWMS)
This Tilt Tray Safe Work Method Statement (SWMS) covers hazards and controls associated with the movement of plant and structures such as portable buildings or shipping containers (referred to as the load) using a Tilt Tray Transport vehicle.
Job Steps Covered in Tilt Tray Safe Work Method Statement
- Planning: Establishes route planning and briefing to avoid unpermitted travel and safety.
- Working Alone: Implements check-in procedures and Emergency Response for working alone.
- Vehicle Operation & Transporting the Load: Details pre-start inspections, safe operation, and collision avoidance measures.
- Arriving at Site: Covers site assessment, induction, and hazard identification upon arrival.
- Pick-up/Set-down of Load: Focuses on noise management and safe loading/unloading practices.
- Environment: Addresses environmental protection measures, including waste management and pollutant reduction.
- Housekeeping: Emphasises maintaining a clean and safe work area to prevent slips, trips, and falls.
- Manual Tasks: Outlines strategies to mitigate fatigue and musculoskeletal disorder (MSD) injuries.
- Refuelling: Establishes safe refuelling practices to prevent fire or explosion.
- On Completion: Details the final checks to secure the site and equipment.
- Emergency Response: Prepares workers for an efficient response to injuries, fatalities, or environmental damage.
Each purchase of our SWMS comes with a complimentary copy of the Legislation & Codes of Practice Reference List, valued at $19.95. This valuable resource provides an up-to-date overview of relevant laws and standards, further supporting your compliance efforts.
Key Features of the SWMS
- Comprehensive Hazard Management: Identifies and provides control measures for a wide range of potential hazards.
- Regulatory Compliance: Aligns with Australian legislation for workplace safety.
- Emergency Response: Includes an emergency response to enhance onsite safety.
- Environmental Consideration: Incorporates measures to minimise environmental impact during operations.
Who is it Suitable For?
This document is essential for businesses and contractors involved in using tilt tray transport vehicles, especially those engaged in construction, logistics, and any operations requiring the movement of heavy plant and structures. It's also invaluable for safety officers and site managers looking to enforce compliance and enhance workplace safety.
Ensure your team operates safely and in compliance with the latest industry standards. Get your copy of the Tilt Tray Safe Work Method Statement today and take a proactive step toward a safer workplace.